销售热线:400-086-0537

如电话无法接通,请拨打集团 销售专员热线

热门搜索: 绞车 , 支柱 , 矿用门 , 锚杆 , 刮板机 , 自救器

气动注浆泵

产品详情

Product details >>>

气动注浆泵主要用于矿井,地铁,隧道,水利,建筑等注浆堵水记忆破碎岩层的注浆凝结工程,也可以用于矿井适应的工作面预注浆。具有气压传动,体积小,重量轻,可无极调量,能定压自动调量,使用可靠等特点。

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛该泵在煤矿井下使用需要配用阻燃抗静电胶管!

<<<<< The pump must be fitted with a flame retardant and anti-static hose in coal mine! >>>>>

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛该泵采用气压传动,体积小,重量轻,可无极调量,能定压自动调量,使用可靠,适用于井下作业。

  • 气动注浆泵
  • 气动注浆泵
  • 气动注浆泵
Flammable, explosive, strong magnetic field, radiation, dust, large temperature variation and watering place, all can be used safely.

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛在易燃、易爆、强磁、辐射、多尘埃、温度变化大以及淋水的场所,均可以安全使用。

气动注浆泵

产品型号及意义

The types and significance of product>>> 产品型号及意义

标记示例:ZBQ-50/6
澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛表示最大排量50L/min,最大输出压力6MPa的气动注浆泵

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛结构紧凑,体积小,移动方便,直接放置在比较平整的地面上即可

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛泵的进出口均采用快插接头,连接吸排料管方便快捷,而且密封可靠

泵的动力为压缩空气,能够改变压气的流量进行无极调速

气动马达带动三个活塞泵,马达和三个活塞泵的活塞面积比为28:1,
澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛决定了进气压力和输出压力比为1:28,能够定比例的高压输送两种液体

Because the production batches, the different models, the picture is for reference only, please contact our sales staff for specific verification

因产品生产批次、具体型号不同,图片仅供参考
详情可联系我们的销售人员进行具体核实

泵的基本结构主要由管架、气缸、活塞、端盖、联接箱、液缸、进排浆缸、换向阀和一些辅助件组成。该泵出厂时配有φ60mm,φ100mm两种液缸和二个φ100m的套,注浆时根据需要可以更换液缸。更换时,先松开液缸左端4个M12螺母,拆下前缸盖,拿下液缸。当需φ60mm液缸时,只需拿下前后缸盖的套即可直接安装φ60mm的液缸; 2 当需φ100mm液缸时,拿下前后缸盖上φ75mm的套,换上φ100mm的套便可安装φ100mm液缸。

The basic structure of the pump is mainly composed of a tube frame, cylinder, piston, end cover, a connecting box, hydraulic cylinder, intake and exhaust paste cylinder, valve and other auxiliary parts. The pump factory is equipped with the φ 60mm, φ 100mm two cylinder and two 100m diameter, grouting according to need can replace the hydraulic cylinder. When the replacement, the hydraulic cylinder is 4 M12 nuts, remove the front cover, with the liquid cylinder. When the diameter of 60mm hydraulic cylinder, hydraulic cylinder sleeve can only take before and after the cylinder head is directly arranged φ 60mm φ 100mm; 2 when the hydraulic cylinder, with before and after the cylinder head diameter of 75mm set, change of φ 100mm sets can be installed with 100mm hydraulic cyli

压缩空气通过球阀到二联体中分水滤气器,净化后的气体到定值式调压阀,在这之间装有一只气压表,可以观察进气压力及判断分水滤气器的滤杯是否堵塞,也可以判断调压阀的工作是否正常,调压阀上的气压表指示调压后输出的气体压力,经过二联体中油雾器到二位五通换向阀及行程阀。气缸拉杆上的拨盘拨动行程阀,由行程阀控制换向阀,变换出气方向,推动气缸活塞作往复运动,气缸排出的废气通过消声器排到大气中去。气缸活塞拉杆直接推动液缸活塞,通过进排浆阀,完成吸排浆的工作,浆液通过混合器及注浆嘴,被压进井壁的孔眼,扩散到岩层的裂隙中去。

二联体中定值调压阀,具有自动调节输出气体流量,而保持输出气体压力不变的性能,由此构成了该泵的闭环自动控制,使排液具有定压自动调量的性能。

Compressed air through the valve to the water separating gas filter two cis, purified gas to a value type pressure regulating valve, is equipped with a pressure gauge in between, the filter cup can observe the inlet pressure and the judgment of water separating gas filter is blocked, it can determine the pressure regulating valve is working properly, gas pressure regulator pressure valve on the pressure gauge indication voltage output, after two conjoined oil mist to two position five way reversing valve and valve. Dial a trip valve cylinder rod, the valve control valve, air outlet direction transformation, push the piston reciprocating cylinder, exhaust gas discharged into the atmosphere through the muffler exhaust. The cylinder piston rod directly pushes the hydraulic cylinder piston, through the discharge valve, complete suction slurry, slurry through the mixer and grouting mouth, hole is pressed into the wall, spread to the fissures in the. Constant pressure regulating valve two of the body, the output of gas flow is adjusted automatically, while keeping the output performance of gas pressure constant, thus forming the closed loop automatic control of the pump, the liquid discharge performance with the constant pressure automatic adjustment.

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛注浆初期由于岩层裂隙大,浆液的扩散阻力小,形成了泵压低,这时气缸的活塞运动阻力小,工作气体压力低,调节阀欲维持其输出气体的压力,便自动增大输出气体的流量,因此泵的往复运动速度快,排量便大。(当耗浆量大于泵的最大排量时,注浆的指示压力低于调定压力)。

Because the rock fissure grouting stage, diffusion resistance size small, forming a pump down, then the piston cylinder motion resistance is small, the working gas pressure is low, regulating valve to maintain the pressure and the output gas, will automatically increase the output of gas flow, thus the reciprocating motion speed pump fast, discharge is great. (when the maximum discharge paste consumption is greater than the pump, indicating pressure grouting is lower than the set pressure).

注浆后期,岩层裂隙逐渐被填满,液浆的扩散阻力增大,使泵压增高,这时的气缸活塞运动阻力随之增大,工作气体的压力也增高,调压阀便自动减少输出的气体流量,以保持输出的气体压力,不超过调定值,从而使泵的运动速度减慢,排量减小。这时,由于浆液扩散时间充裕而维持了注浆压力不变,保护了施工安全。当岩层裂隙被浆液填满后,注浆量达到零时,泵仍可以维持终压不变。因而注浆填充的密实性好。该泵的自动调节性能,比其他操作调节的形式注浆泵阀控制及时,而且准确,因而可以缩短注浆时间,保证注浆质量,节省注浆材料,保证安全施工。

The grouting period, rock fissures are filled with liquid, diffusion resistance increases, the pump pressure, the cylinder piston motion resistance at this time increases, the working gas pressure is increased, the pressure regulating valve will automatically reduce the gas flow output, to keep the gas pressure output, not more than the setting value, so that the pump the movement speed slow, emission reduction. At this time, the slurry diffusion time and maintain the grouting pressure unchanged, to protect the safety of construction. As the rock fracture by slurry filled, grouting amount reaches zero, the pump can still maintain the final pressure constant. So fill grouting compactness. Automatic adjustment of the performance of the pump, than any other operating mode of regulation valve control grouting timely, and accurate, which can shorten the grouting time, ensure the grouting quality, save the grouting material, ensure the safety of construction.

液缸为单缸双作用式,前后腔排量比为1:0.7;1:0.8;1:0.9三种,能适应一般水泥~水玻璃双液注浆(一般双液比为1:0.6~1:1)。

气缸、液缸、拉杆均经热处理,并镀硬铬层抛光,能防锈并且耐磨。各密封部位全部采用"O"型密封圈,拆装简单,密封可靠。混合器与注浆嘴联成一体,混合后的浆液出口快,不易在管道内凝固阻塞。注浆嘴用胶带涨紧于水眼,装拆简便,使 3 用可靠。转换水眼时,应注意孔的失园度不能加大,也可以按孔径配用适当壁厚的胶管。浆液箱及清水箱可用3mm钢板做成0.5×0.5×0.5m方箱。

The fluid cylinder for single cylinder double acting type, before and after the cavity volume ratio is 1:0.7; 1:0.8; 1:0.9 three, can meet the general cement - water glass double liquid grouting (general double liquid ratio of 1:0.6 to 1:1). Cylinder, hydraulic cylinder, pull rod are heat treated, and hard chromium plating layer polishing, rust and abrasion resistance. The sealed parts all adopt "O" type sealing ring, simple assembly and disassembly, reliable sealing. The mixer and the grouting nozzle are connected into a whole, a slurry outlet after mixing the fast, not easy to block the solidification in the pipeline. Grouting mouth with tape tension in water, easy assembling and disassembling, make 3 with reliable. Conversion of water, should pay attention to the Lost Garden degree can not increase the hole, can also press the aperture with proper wall thickness of tube. The limestone slurry tank and water tank can be made of 3mm steel plates of 0.5 * 0.5 * 0.5m square box.

基本参数

<<< Basic parameters >>>

项目

参数值

供气压力(MPa)

0.4

0.5

0.63

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛最大排浆压力(MPa)

4.5

6

7.0

最大排浆流量(L/min)

50

50

50

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛耗气量(工况)(m3/min)

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛≤0.64

≤0.7

≤0.77

噪声(dBA)

声压级

≤95

≤95

≤95

声功率级

≤110

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛≤110

澳门刘伯温四肖选一肖-澳门必中三肖三码-澳门论坛澳门高手论坛≤110

使用温度(℃)

0~50

浆液混合比

1:0.6~1:1

重量(kg)

100

最高工作气压(MPa)

0.63

适用介质

水泥、水玻璃

酱缸直径(mm)

60、75、100

往返次数(次/min)

55~2

行程(mm)

120

调节气压(MPa)

0.05~0.63

通气管径

G1”

外形尺寸(mm)

1000×504×645

 

进气胶管与泵阀接通时,要捆扎牢固,以免脱掉伤人!

<<<<< The intake hose is communicated with the valve, must be securely strapped, so as not to take off! >>>>> 气动注浆泵
上一个产品:矿用注浆泵
下一个产品:ZBQ-30/6型气动注浆泵

产品分类

路面机械
石油设备
耐高温产品
排水设备
润滑油
水利设备
环保设备
农用飞机
除雪设备
3D打印机
园林机械
仪器仪表
矿用门
安防救援设备

气动注浆泵相关产品

产品评论

查询超时已过期